CHITARRA CLASSICA DI LIUTERIA ANNI 50 DITTA PROF DARIO MOY GUITAR

Description

YOU CAN SHIP  AT 2
0.00  US DOLLARS
TO MANY EUROPEAN COUNTRIES!!!
SPEDIZIONE IN ITALIA  :  8.00 EURO,
TRAMITE CORRIERE ESPRESSO  ( CONSEGNA IN 1 GIORNO LAVORATIVO )
MANY OTHER PHOTOS AVAILABLE upon request
CHITARRA CLASSICA DI LIUTERIA ANNI 50 DITTA PROF DARIO MOY
·
Vintage classic guitar with cartouche inside showing the following writing
”Chitarre da concerto.
Ditta Prof Dario Moy-Roma –Via S. 22 c Niccolò da Tolentino Roma  anno 195
""
•
The hole has threads of various colors, but I cannot understand if they are only drawn or inlaid instead.
•
The edges of the table are inlaid with fillets of different colors for the entire perimeter. The hole, circular in shape, has a diameter of 87 mm
•
The board is intact, has no splits, the bonding with the band is in excellent condition
•
The thickness of the wood of the table measured with the caliber near the hole is 4.2 mm
•
The bridge, 18 cm long, is made of wood, in one piece part glued to the board and raised part that supports the ropes-The bone of the bridge in white material I do not understand if it is made of hard plastic or ivory-
•
The anchoring system of the ropes to the bridge is clearly visible from the photos
·
The bottom in two parts glued to each other is detached in the center along its entire length, while on the upper side of the back with a guitar embraced, there is a split with parts not distant from each other about 16 cm long. The bottom and the table seem to me to be in solid wood, not in laminate, and are firmly glued with the band-
·
The handle and the headstock are made from a single piece of wood.
·
The reddish wood keyboard, glued to the handle, has a thickness of 7-8 mm. The first keys up to the fifth that worked the most are slightly worn, the other keys are flat. The mechanics are in brass, the keys to adjust the tuning, are in gray plastic. At the sight the neck seems perfectly straight-
•
The guitar is equipped with metal strings the three serious ones in plastic the remaining three, it has been tuned and played a bit and the tuning seems to hold up well, the strings do not crawl on the metal bars of the fretboard, and are easily lowered without effort. I think it is a guitar that can play as it is
•
The base of the handle is in two glued parts
•
Measurements:
•
Lower part of the table under the hole, width greater than 37.5 cm
•
Upper part of the table above the hole, width 28 cm wider
·
Guitar width in minimal narrowness near the hole 24.3 cm
•
Keyboard length taken from hole up to nut 43 cm
•
Length of the handle including the 51 cm headstock
.
Length of the headstock up to the nut 18.5 cm
•
Keyboard width at nut 54 mm
•
Width of the keyboard at the key near the 63 mm band
•
Keyboard width at the last key near the hole 66 mm
•
Height of the band in the lower part of the guitar body 95.5 mm
•
Height of the band at the top of the guitar body near the base of the neck 90 mm
•
Total length of the guitar taken from the bottom part 100 cm
·
The guitar has seen it, a little on the fly in truth, a person who knows a little about it, plays the guitar and delights in the restoration of these ... Well ... he showed some interest in the tool. On the internet I have not found anything about this manufacturer or luthier
·
I cannot understand the woods with which the instrument was built, I am not capable of it.
·
Weight 1597 grams
SPEDIZIONE IN ITALIA  :  8.00 EURO,
TRAMITE CORRIERE ESPRESSO   ( CONSEGNA IN 1 GIORNO LAVORATIVO )
YOU CAN SHIP  AT
50.00 US DOLLARS
TO MANY EUROPEAN COUNTRIES!!!
COMBINE MORE ITEMS AND YOU SAVE A LOT OF MONEY IN SHIPPING CHARGE
YOU CAN SHIP  AT 2
0.00 US DOLLARS
TO MANY EUROPEAN COUNTRIES!!!
PLEASE READ SHIPPING INFO, THESE PRICES ARE NOT 100 % EXACT, BUT THEY ARE VERY CLOSE TO FINAL SHIPPING CHARGE. ( MAYBE YOU WILL PAY LOWER SHIPPING COST , I CAN EXACTLY SAY WHEN THE PACKAGE WILL BE READY, THE SHIPPING CHARGE DEPENDS ON PACKAGE WEIGHT ).
EXACT AMOUNT DEPENDS ON EURO / US DOLLARS RATE
TQR V71  941